2026-06-27 7 min read
In our years serving Lumber Bridge, we've seen this problem again and again: a homeowner's garage door stops working, they panic about the cost, and then they get quoted wildly different prices from different shops. A snapped torsion spring typically runs between $200 and $400 for parts and labor, but the final bill depends on your door type, spring configuration, and whether you need same-day service. We'll walk you through what actually goes into that estimate so you know what's fair.
Garage door springs come in two main types: torsion and extension springs. Torsion springs sit above your door and counterbalance its weight as it opens and closes. Extension springs run along the sides and stretch to help lift the door. Torsion springs typically cost more to replace because they're under higher tension and require more precise installation.
A single torsion spring replacement might cost $150 to $250 for the part alone, depending on your door's weight. If both springs need replacing (which we often recommend for safety and balance), you're looking at double that. Extension springs are usually cheaper per unit, running $75 to $150 each, but labor costs stay roughly the same.
The real variable is labor. A straightforward replacement takes about an hour. But if your door is older, springs are seized, or you need same-day emergency service after hours, you'll pay more. That's not dishonest pricing; that's the reality of having a technician come out fast.
**Need garage door springs in Lumber Bridge today?** Call (910) 812-0968. we cover same-day service across the area.
When Lumber Bridge Garage Doors gives you an estimate, you're paying for the spring itself, hardware (cables, brackets, pulleys if needed), labor, and our diagnostic work. We don't charge extra just because you're stressed. We also don't nickel-and-dime you with surprise fees at the end.
Some shops bundle "emergency fees" into their quote without telling you upfront. We tell you exactly what the job costs before we touch anything. If a spring is snapped, it's snapped. If both need replacing, we explain why and let you decide.
One thing we always mention: if your springs are over 7 or 8 years old and one breaks, the other one is probably not far behind. Springs last about 7 to 9 years with normal use, not 10. Replacing both at once costs more upfront, but it saves you from another service call in six months when the second one fails. That's the advice we'd give our own family.
Check out our detailed breakdown on why garage door springs break and what replacement really costs for more context on lifespan and wear patterns.
If you have a lighter residential door (most do), extension springs might be your setup. They're cheaper to replace and simpler to install. Torsion springs handle heavier doors and commercial applications better, and they're safer because they don't snap across a room if they fail.
The safety difference matters more than the cost difference. A snapped extension spring can whip across your garage and cause serious injury. Torsion springs are enclosed and contained. If you're not sure which type you have, we can assess your garage door safety features and recommend the right setup.
If your door is stuck and you call at 7 p.m., you'll pay more than if you call at 9 a.m. on a Tuesday. That's fair. We keep technicians available for emergencies because that's what homeowners in Lumber Bridge and surrounding areas need. We don't gouge you for it, but we're not absorbing that cost ourselves either.
A same-day emergency call typically adds $75 to $150 to your bill, depending on timing and location. We'll tell you that before we confirm the appointment. No surprises.
The best way to know what your repair will cost is to have us come look at it. We offer free estimates. We'll tell you whether one spring or both need replacing, what type your door uses, and what the honest price is. Schedule a free quote today and we'll get you a clear number.
Don't assume the cheapest quote is the best one. The most expensive usually isn't either. Fair pricing means transparent costs, quality parts, and workmanship that lasts.
How long does a garage door spring replacement take? Most spring replacements take 45 minutes to 90 minutes depending on spring type and whether both need replacing. We try to schedule same-day service when possible so your door works again quickly.
Can I replace just one spring if only one is broken? Technically yes, but we don't recommend it. Both springs wear at the same rate. Replacing only one creates imbalance and puts extra stress on the new spring, shortening its life.
What's the difference between a $250 spring job and a $400 spring job? Usually it's whether one or both springs need replacing, the door weight, and whether it's emergency service. We break down the cost in writing before we start work.
Are garage door spring repairs covered by homeowners insurance? Rarely. Most homeowners policies don't cover wear and tear on springs. Check your policy, but plan to pay out of pocket. That's why fair pricing upfront matters.
How do I know if my springs are about to fail? Listen for creaking or squealing when the door opens. If one spring is visibly bent or frayed at the ends, replacement is urgent. Contact us for a safety inspection if you're unsure.